Impact Wrench, Using: Installing/attaching:

Installing and attaching nuts is permitted using a suitable impact wrench when paying attention to the following conditions.

• Position the bolts and nuts by hand.
• Only use an impact wrench with an adjustable speed and torque range.
• The impact function of the impact wrench may not be used.
• The maximum speed must not exceed 300 RPM.
• Use suitable screwdriver bits (for example plastic-coated bits) close to delicate surfaces.
• Install or attach bolts with locking fluid or self-locking nuts with low speed.
• Only install or attach bolts and nuts until they stop.
• Apply the additional tightening specification by hand using a torque wrench.
• Use a torque wrench with angled rotation function or a rigid torque wrench for the prevailing angle of torque.