Shift Mechanism, Removing And Installing: Installing

Install In The Reverse Order Of Removal While Noting The Following:

Replace The Gearshift Lever Cable Lock Washer After Removal.
Do Not Bend Or Kink The Selector Lever Cable.
Do Not Lubricate The Selector Lever Cable.
After Installation The Selector Mechanism, The Selector Lever Cable Must Be Checked For Ease Of Movement And Adjusted.

-- Insert The Selector Lever Cable -1- In The Cable Bracket -4- And Install A New Lock Washer -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Press The Selector Lever Cable -1- Carefully Onto The Selector Lever -2-.

-- If Removed, Install The Cable Bracket -4- With The Bolts -5- On The Transmission.

-- Engage The Selector Lever Cable -1- In The Clip Of The Bracket -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Install The Center Console. Refer To CENTER CONSOLE, REMOVING AND INSTALLING .

-- Install The Selector Lever Handle. Refer To SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .

-- Adjust The Selector Lever Cable. Refer To SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .

-- Check The Selector Mechanism. Refer To SHIFT MECHANISM, CHECKING .