Selector Lever Handle, Removing And Installing: Installing

Courtesy of AUDI OF AMERICA, LLC

Install In The Reverse Order Of Removal While Noting The Following:

• The Locking Button -2- Points In The Direction Of Travel.

-- Press The Selector Lever Handle -1- Completely Onto The Selector Lever In Direction Of -Arrow B- Without Touching The Locking Button -2-.

• The Selector Lever Handle Must Engage Into The Ring Groove On The Selector Lever.

-- Turn The Locking Ring All The Way In The Direction Of -Arrow B-.

Courtesy of AUDI OF AMERICA, LLC

• It Must Be Possible To Turn The Locking Ring. If Necessary, Press The Selector Lever Handle Again.
• The Tab -1- On The Locking Ring Is Under The Tab -2- On The Selector Lever Handle.
• The Selector Lever Handle Is Only Properly Locked If The Locking Ring Was Turned. Only Then May The Locking Button On The Handle Be Pressed.
• The Locking Button May Have An Increased Resistance To Pressure The First Time It Is Pushed After Installing The Selector Lever Handle.

-- Press The Locking Button On The Selector Lever Handle.

-- Fold The Selector Lever Boot Downward And Clip It In.

-- Check The Selector Mechanism. Refer To SHIFT MECHANISM, CHECKING .