Selector Lever Cable, Checking And Adjusting: Adjusting:

-- Move The Selector Lever Into "P" Position.

• The Adjusting Screw -Arrow- Must Be Loosened.

  Courtesy of AUDI OF AMERICA, LLC

-- Move The Selector Lever -2- On The Transmission Into "P" (Push The Gearshift Lever Toward The Rear).

• The Parking Lock Must Be Engaged.

• The Parking Lock Is Engaged When It Is Not Possible To Rotate Both Front Wheels In The Same Direction At The Same Time.

-- Lightly Tap The Handle On The Selector Lever Back And Forth But Do Not Move It Out Of "P" Under Any Circumstances.

• This Places The Selector Lever Cable Core In Its Optimal Position.

-- Tighten The Bolt -Arrow-.