ATF Circuit, Bleeding

• Wear Protective Eyewear.

-- Check The ATF Level And Fill As Described. Refer To ATF LEVEL, CHECKING .

-- Perform Road Test And At The Same Time The ATF Temperature Must Reach At Least 90° C (194° F) To Bleed The ATF Circuit.

When Air Escapes The ATF Circuit, The ATF Level In The Transmission Decreases. Therefore, The ATF Level Must Be Checked Again Later After The Fluid Cools.

-- Let The ATF Cool Down To 30° C (86° F).

-- Check The ATF Level Again. Refer To Checking .