Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING: Removing

If the control module is replaced, the test plan to replace the control module must be performed.

-- Perform the "control module, replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .

Continuation

-- Remove the front passenger side carpet. Refer to CARPET, REMOVING AND INSTALLING .

-- Remove the Digital Sound System Control Module -J525-. Refer to DIGITAL SOUND SYSTEM CONTROL MODULE -J525-, REMOVING AND INSTALLING, PREMIUM SOUND .

-- Remove the lock washers -arrows- and remove the crash pad -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -1 and 5- and remove the cover -6-.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -3- and free up the wiring harness -2-.

-- Disconnect the connectors -4-.

-- Remove the bolt and nuts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bracket using the Driver Assistance Systems Control Module -J1121- -1-.

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bracket -1-.