Digital Sound System Control Module -J525-, REMOVING AND INSTALLING, PREMIUM SOUND SYSTEM (9VS), FROM MY 2021: Removing
WARNING: This page is about a different car, the 2024 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the interior partition cover. Refer to COMPONENT LOCATION OVERVIEW - VEHICLE INTERIOR TRIM PANELS .
-- Release and disconnect the connector -1- from the Digital Sound System Control Module -J525- -3-.
-- Remove the bolts -2-.
-- Remove the Digital Sound System Control Module -J525- -3- from bracket -4-.
-- If necessary, then remove the nuts -arrows- and the bracket -4-.