Digital Sound System Control Module -J525-, REMOVING AND INSTALLING, ADVANCED SOUND SYSTEM (8RF), FROM MY 2021: Removing
WARNING: This page is about a different car, the 2024 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the interior partition cover. Refer to COMPONENT LOCATION OVERVIEW - VEHICLE INTERIOR TRIM PANELS .
-- Remove the nuts -arrows- from the bracket -2-.
-- Pivot out the bracket -2- with the Digital Sound System Control Module -J525- -1-.
-- Release and disconnect the connectors -3- from the Digital Sound System Control Module -J525- -1-.
-- Remove the bolts -3-.
-- Remove the Digital Sound System Control Module -J525- -1- from bracket -2-.