Chip Card Reader Control Module, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ5 Sportback, 2022 Audi Q5 Sportback, 2021 Audi SQ5 Sportback, and 2021 Audi Q5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Open the glove compartment.
-- Remove the chip card from the Chip Card Reader Control Module -J676-.
-- Slide the control module -1- rearward in the direction of the -arrow- until it can be removed from the trim.
-- Disconnect the connectors at the control module.
-- Remove the control module.