Overview - Steering Column
- Bolt
- Always replace after removing
- Clean the threaded hole, for example, using a thread tap, before installing the new bolt.
- Install the bolt first by hand in the first threads. Check if the steering intermediate shaft is seated correctly by pulling. Then tighten the bolt.
- 20 Nm +90°
- Steering Intermediate Shaft
- Removing and Installing. Refer to STEERING INTERMEDIATE SHAFT, REMOVING AND INSTALLING .
- Steering Column
- Removing and Installing. Refer to STEERING COLUMN, REMOVING AND INSTALLING .
- Check for damage. Refer to STEERING COLUMN, CHECKING FOR DAMAGE .
- Crossmember
- For the instrument panel
- Bolt
- 4.5 Nm
- Electronic Steering Column Lock Control Module -J764-
- Removing and Installing. Refer to Electronic Steering Column Lock Control Module -J764-, REMOVING AND INSTALLING .
- Bolt
- Quantity: 4
- Tightening specification and sequence. Refer to Fig 2.
- Bolt
- Tightening specification and sequence. Refer to Fig 3.
- Active Steering Safety Lock Actuator -F437-
- Removing and Installing. Refer to ACTIVE STEERING SAFETY LOCK (LOCKING SOLENOID), REMOVING AND INSTALLING .
- Power Adjustable Steering Column Control Module -J866-
- Removing and Installing. Refer to Power Adjustable Steering Column Control Module -J866-, REMOVING AND INSTALLING .
- Bolt
- 1.5 Nm +/- 0.3 Nm
- Bolt
- Always replace after removing
- Clean the threaded hole, for example, using a thread tap, before installing the new bolt.
- Install the bolt first by hand in the first threads. Check if the steering intermediate shaft is seated correctly by pulling. Then tighten the bolt.
- 20 Nm +90°
- Nut
- 4.5 Nm
Steering Column - Tightening Specification and Sequence
-- Tighten the steering column bolts -arrows- to 20 Nm in a -1 to 4- sequence.
Active Steering Safety Lock (Locking Solenoid) - Tightening Specification and Sequence
-- Tighten the bolts in steps:
| Step | Bolt | Tightening Specification |
|---|---|---|
| 1. | -1- | 2 + 2 Nm |
| 2. | -2- | 4 + 2 Nm |
| 3. | -1- | 8 + 2 Nm |
| 4. | -2- | 8 + 2 Nm |