Overview - Windshield Wiper System
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi S7, 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, and 2021 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification and sequence. Refer to Fig 2.
- Windshield Wiper Motor -V-
- With the Wiper Motor Control Module -J400-
- Removing and Installing. Refer to Windshield Wiper Motor -V-, REMOVING AND INSTALLING .
- Bolt
- Tightening specification and sequence. Refer to Fig 2.
- Nut
- 32 Nm
- Cap
- Front Passenger Side Windshield Wiper Arm
- There are different lengths and versions. Refer to the Parts Information.
- Removing and Installing. Refer to WINDSHIELD WIPER ARMS, REMOVING AND INSTALLING .
- Adjusting. Refer to WINDSHIELD WIPER ARMS, ADJUSTING .
- Front Passenger Side Wiper Blade
- There are different lengths. Refer to the Parts Information.
- Replacing. Refer to WIPER BLADE, REMOVING AND INSTALLING .
- Windshield Wiper Arm Cover
- Windshield wipers with integrated washer nozzles only
- Driver Side Wiper Blade
- There are different lengths. Refer to the Parts Information.
- Replacing. Refer to WIPER BLADE, REMOVING AND INSTALLING .
- Driver Side Windshield Wiper Arm
- There are different lengths and versions. Refer to the Parts Information.
- Removing and Installing. Refer to WINDSHIELD WIPER ARMS, REMOVING AND INSTALLING .
- Adjusting. Refer to WINDSHIELD WIPER ARMS, ADJUSTING .
- Windshield Wiper Arm Cover
- Windshield wipers with integrated washer nozzles only
- Cap
- Nut
- 32 Nm
- Bolt
- Tightening specification and sequence. Refer to Fig 2.
Windshield Wiper Motor - Tightening Specification and Sequence
-- Tighten the bolts in the steps shown in the sequence:
| Step | Bolts | Tightening Specification |
|---|---|---|
| 1. | -1- | Install by hand all the way |
| 2. | -2 and 3- | 8 Nm |
| 3. | -1- | 8 Nm |