Vehicle Electrical System Control Module J519, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi A6 allroad. However, it is still accessible from the selected car via links, so may be relevant.
If the Vehicle Electrical System Control Module - J519- is replaced, the test plan for replacing the control module must be performed.
-- Perform the "control module, replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .
Continuation
-- Remove the A-pillar lower trim panel. Refer to A-PILLAR LOWER TRIM PANEL, REMOVING AND INSTALLING .
-- Disconnect the antenna wires -1-.
-- Disconnect the connectors -3-, -5- and -6-.
-- Free up the wiring harness -7-.
-- Release the retainers -arrows-.
-- Remove the Vehicle Electrical System Control Module -J519- -2- downward from the mount -4-.