Garage Door Opener Control Module, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi A6 allroad. However, it is still accessible from the selected car via links, so may be relevant.

If the Garage Door Opener Control Module -J530- is being replaced, then the test plan for replacing the control module must be performed.

-- Perform the "control module, replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .

Continuation

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -4-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -1-.

-- Remove the Garage Door Opener Control Module -J530- -3- from the mount -2- -arrow-.