Overview - Windshield

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi S7, 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, and 2021 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

The following dimensions represent the distances at the marked points. This must also be oriented to the layout of the original adhesive bead on the removed component.

Courtesy of AUDI OF AMERICA, LLC

Adhesive Bead
- Upper
- Market-Specific Version
- Observe minimum curing times. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
  A6:
- Different spaces:
  - Dimension -e- = 17.8 mm
  - Dimension -f- = 187 mm
  - Dimension -g- = 263 mm
  - Dimension -h- = 180 mm
- Adhesive bead thickness. Refer to Adhesive Application: .
  A7 Sportback:
- Different spaces:
  - Dimension -e- = 18.1 mm
  - Dimension -f- = 18.7 mm
  - Dimension -g- = 263 mm
  - Dimension -h- = 181 mm
- Adhesive bead thickness. Refer to Adhesive Application: .
Adhesive Bead
- Observe minimum curing times. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
  A6:
- Different distances to window edge:
  - Dimension -a- = 7.5 mm
  - Dimension -b- = 7.6 mm
  - Dimension -c- = 7.2 mm
  - Dimension -d- = 7.1 mm
- Adhesive bead thickness. Refer to Adhesive Application: .
- Positioning of the double adhesive bead refer to item 1
  A7 Sportback:
- Different distances to window edge:
  - Dimension -a- = 7.7 mm
  - Dimension -b- = 7.7 mm
  - Dimension -c- = 8.3 mm
  - Dimension -d- = 8.4 mm
- Adhesive bead thickness. Refer to Adhesive Application: .
- Positioning of the double adhesive bead refer to item 1
Plenum Chamber Cover Frame
- Windshield component refer to item 4
- With a new windshield refer to item 4, remove the protective molding before installing the cowl panel trim. Refer to Fig 1.
Windshield
- Removing and Installing. Refer to WINDSHIELD, REMOVING AND INSTALLING .
- Center the side distance to the A-pillars
- Distance from the windshield to the upper window frame. Refer to Cover Profile, Mounting on Undamaged Windshield: => Adjust the distance from the windshield -1- to the upper window frame. .

Protective Molding, Removing

Fig 1: Windshield, Protective Molding And Frame

Courtesy of AUDI OF AMERICA, LLC

-- For a new windshield -3-, the protective molding -1- must first be removed from the frame -2- before assembling the plenum chamber cover.