LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> S6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 539 (General Information) >> General Information >> Maintenance Work >> Brake Fluid Level, Checking >> Testing Values and Process Specifications Table:

Testing Values and Process Specifications Table:

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S6, 2022 Audi A6 Quattro, 2021 Audi S6, 2021 Audi A6 Quattro, and 2020 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
Service: Fluid Level Specified Value:
Delivery service Fluid level at the MAX mark.
Changing the brake fluid Fluid level between the MAX and MIN mark, consistent with the wear condition of the brake pads.

The leak test for the brake system is a repair procedure and should be charged separately.

Procedure: 

-- Check the brake fluid level based on the markings -arrows- in the brake fluid reservoir.

Fig 1: Brake Fluid Reservoir Level MIN & Max Marks
GWWA00-10279Courtesy of AUDI OF AMERICA, LLC

-- Perform the following actions depending on the test result:

Fluid level: Evaluation / Action:
Over the MAX mark Extract the brake fluid.
Under the specified level Perform a leak test for the brake system. Refer to LEAK TEST .
NOTE:

Due to wear and the automatic adjustment of the brake pads while driving, the brake fluid level lowers.

scientia non olet · About LEMON Manuals