| Air Conditioning |
| Service |
| |
R1234yf |
WORKING WITH A/C SERVICE STATION (1 OF 2)
WORKING WITH A/C SERVICE STATION (2 OF 2) |
| |
R134a |
AIR CONDITIONING (REFRIGERANT R134A SERVICING - PRESSURE CHECKING)
AIR CONDITIONING (REFRIGERANT R134A SERVICING TOOLS & EQUIPMENT) |
| Torque |
OVERVIEW - A/C COMPRESSOR |
| Axle Nut/Hub Nut/Wheel Bearing Unit |
| Front |
200 Nm +180°
OVERVIEW - WHEEL BEARING |
| Rear |
200 Nm +180°
OVERVIEW - WHEEL BEARING |
| Battery |
BATTERY |
| Brakes |
| Bleeding Sequence |
HYDRAULIC SYSTEM, BLEEDING |
| Disc Brakes |
| |
Front |
FRONT BRAKES |
| |
Rear |
REAR BRAKES |
| Torque |
| |
Front |
OVERVIEW - FRONT BRAKES |
| |
Rear |
OVERVIEW - REAR BRAKES |
| Charging |
| Generator |
GENERATOR |
| Torque |
OVERVIEW - GENERATOR |
| Drive Belts |
| Adjustment |
| 2.0L |
RIBBED BELT, REMOVING AND INSTALLING (DMSA)
RIBBED BELT, REMOVING AND INSTALLING (DPAA) |
| 2.9L & 3.0L |
RIBBED BELT, REMOVING AND INSTALLING (CWGD, DECA) |
| Belt Routing |
| 2.0L |
OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE (DMSA)
OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE (DPAA) |
| 2.9L & 3.0L |
OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE (CWGD, DECA) |
| Engine Cooling |
| General Service Specifications |
Refer to the appropriate FLUID CAPACITY TABLES information. |
| Radiator Cap Pressure |
| 2.0L |
CHECKING THE PRESSURE RELIEF VALVE IN THE VERSION 1 CAP (DMSA)
CHECKING THE PRESSURE RELIEF VALVE IN THE VERSION 1 CAP (DPAA) |
| 2.9L & 3.0L |
CHECKING THE PRESSURE RELIEF VALVE IN THE VERSION 1 CAP (CWGD, DECA) |
| Water Pump R & I |
| 2.0L |
COOLANT PUMP/COOLANT THERMOSTAT (DMSA)
COOLANT PUMP/COOLANT THERMOSTAT (DPAA) |
| 2.9L & 3.0L |
COOLANT PUMP/COOLANT THERMOSTAT (CWGD, DECA) |
| Engine Mechanical |
| 2.0L |
| |
|
Compression |
COMPRESSION, CHECKING (DMSA)
COMPRESSION, CHECKING (DPAA) |
| Oil Pressure |
OIL PRESSURE, CHECKING (DMSA)
OIL PRESSURE, CHECKING (DPAA) |
| |
|
Idle |
0.85 to 1.6 bar (12.33 to 23.21 psi) |
| |
|
2, 000 RPM |
1.2 to 1.6 bar (17.4 to 23.21 psi) |
| |
|
3, 700 RPM |
3.0 to 4.0 bar (43.51 to 58.02 psi) |
| Overhaul |
ENGINE ASSEMBLY (DMSA)
ENGINE ASSEMBLY (DPAA) |
| Torque |
Refer to the appropriate Engine article |
| 2.9L & 3.0L |
| |
|
Compression |
ENGINE ASSEMBLY (CWGD, DECA) |
| Oil Pressure |
OIL PRESSURE, CHECKING (CWGD, DECA) |
| |
|
Idle |
minimum 0.9 bar (13.05 psi) |
| |
|
2, 000 RPM |
minimum 1.3 bar (18.85 psi) |
| Overhaul |
ENGINE ASSEMBLY (CWGD, DECA) |
| Torque |
Refer to the appropriate Engine article |
| Fluid Specifications |
See FLUIDS under MAINTENANCE tab. |
| Engine Oil Drain Plug |
30Nm |
| Flywheel/Flex Plate Torque |
60 Nm + 90° |
| Fuel System |
| Fuel Pressure & Test Procedure |
TRANSFER FUEL PUMP -G6-, CHECKING |
| Ignition |
| Firing Order & Cylinder Identification |
FIRING ORDER & CYLINDER IDENTIFICATION |
| Ignition Wires |
Coil-On-Plug |
| Spark Plug |
N/A |
| Starting |
| Starter |
STARTER |
| Torque |
OVERVIEW - STARTER |
| Wheel Alignment |
| Adjustment Specifications |
AXLE ALIGNMENT SPECIFIED VALUES |
| Torque |
| |
|
Refer to the appropriate Wheel Alignment article |
| Wheel & Tire |
| Wheel Lug Nut Torque |
120 Nm |