Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2022 Audi e-tron GT and 2022 Audi RS e-tron GT. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Clean the lens on the windshield with cleaning solution.
-- Remove and dispose the clamp -1- in direction of -arrow-.
-- Insert the guide -3- into the mount -2-.
-- Place the support -4- on the clamp -5-.
-- Slide the support in between the clamp and the mount and press in until it engages audibly.
Conditions
- The support must touch the mount -arrow-.
-- Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING, STATIC CALIBRATION (STATIONARY CALIBRATION) .