LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> RS e-tron GT >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Assistance Systems) >> 98 Assistance Systems >> Sensors And Control Modules >> Driver Assistance Systems Front Camera -R242- >> Driver Assistance Systems Front Camera -R242- LENS, REMOVING AND INSTALLING. >> Removing

Driver Assistance Systems Front Camera -R242- LENS, REMOVING AND INSTALLING.: Removing

WARNING: This page is about a different car, the 2022 Audi e-tron GT and 2022 Audi RS e-tron GT. However, it is still accessible from the selected car via links, so may be relevant.

-- Put the scraper -1- from the Scraper Set: VAS6845  in between the roof module and the cover.

GWWA68-11354Courtesy of AUDI OF AMERICA, LLC

-- Unclip the cover -2- in direction of -arrows-, for this turn the scraper around its own axle.

-- Disengage the retaining strap -3-.

-- Pull the cover -2- downward in direction of -arrow A- and at the same time release the retainers -1- by firmly pressing on the cover in direction of -arrow B-.

Fig 1: Automatic High Beam Assist Control Module -J844-
GWWA68-10846Courtesy of AUDI OF AMERICA, LLC

-- Free up the connector -1- and disconnect.

GWWA98-10163Courtesy of AUDI OF AMERICA, LLC

-- Release the retainer -2-, remove the lens -3- in direction of -arrow-.