Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2022 Audi e-tron GT and 2022 Audi RS e-tron GT. However, it is still accessible from the selected car via links, so may be relevant.

If the control module is replaced, the test plan to replace the control module must be performed.

-- Perform the "control module, replacing" function using the. Refer to Diagnostic Entries .

Continuation

-- Remove the front passenger side carpet. Refer to CARPET, REMOVING AND INSTALLING .

-- Remove the Digital Sound System Control Module -J525-. Refer to DIGITAL SOUND SYSTEM CONTROL MODULE -J525-, REMOVING AND INSTALLING, PREMIUM SOUND .

-- Remove the lock washers -arrows- and remove the crash pad -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -1 and 5- and remove the cover -6-.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -3- and free up the wiring harness -2-.

-- Disconnect the connectors -4-.

-- Remove the bolt and nuts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bracket using the Driver Assistance Systems Control Module -J1121- -1-.

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bracket -1-.