Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2022 Audi e-tron GT and 2022 Audi RS e-tron GT. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Tighten the bolt and nuts in the sequence -1, 2 and 3-.
If the Control Module was Replaced, Perform the Calibration of the Driver Assistance Systems Front Camera -R242-.
-- Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING, STATIC CALIBRATION (STATIONARY CALIBRATION) .
Continuation