Overview - Control Module For Adaptive Cruise Control
WARNING: This page is about a different car, the 2023 Audi e-tron S and 2023 Audi e-tron Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Cover
- With Heating Element for Adaptive Cruise Control Radar Sensor - Z185-
- Removing and Installing. Refer to Heating Element for Adaptive Cruise Control Radar Sensor - Z185-, REMOVING AND INSTALLING .
- Bracket
- For connector
- Spring Nut
- Quantity: 4
- Bolt
- 4 Nm
- Quantity: 4
- Clip
- Open version
- Cannot be removed without being damaged
- Stud Bolt
- Note the adjustment dimension. Refer to Installing .
- Clip
- Must be replaced when the stud bolt is removed
- Replacing. Refer to CLIP ON Control Module for Adaptive Cruise Control -J428-, REPLACING .
- Stud Bolt
- Note the adjustment dimension. Refer to Installing .
- Clip
- Must be replaced when the stud bolt is removed
- Replacing. Refer to CLIP ON Control Module for Adaptive Cruise Control -J428-, REPLACING .
- Control Module for Adaptive Cruise Control -J428-
- Removing and Installing. Refer to Control Module for Adaptive Cruise Control -J428-, REMOVING AND INSTALLING .
- Adjusting. Refer to RADAR SENSOR (Control Module for Adaptive Cruise Control -J428-), ADJUSTING .
- Clip
- Must be replaced when the stud bolt is removed
- Replacing. Refer to CLIP ON Control Module for Adaptive Cruise Control -J428-, REPLACING .
- Stud Bolt
- Note the adjustment dimension. Refer to Installing .
- Clip
- Open version
- Cannot be removed without being damaged
- Clip
- closed version
- Cannot be removed without being damaged
- Note the installation position
- Retaining Plate
- Removing and Installing. Refer to RETAINING PLATE FOR Control Module for Adaptive Cruise Control -J428-, REMOVING AND INSTALLING .
- Radiator Grille