Steering Wheel Touch Recognition Control Module J1158, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi Q4 e-tron and 2023 Audi Q4 e-tron. However, it is still accessible from the selected car via links, so may be relevant.
If the control module is replaced, the test plan for replacing the control module must be performed.
-- Perform the "control module, replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .
Continuation
-- Remove the airbag unit with the Driver Airbag Igniter -N95-. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
-- Draw sketches or take pictures of the wire routing in the steering wheel.
-- Disconnect the connectors -2-.
-- Remove the Steering Wheel Touch Recognition Control Module -J1158- -1-.