Control Module For Emergency Call Module And Communication Unit J949, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi Q4 e-tron and 2023 Audi Q4 e-tron. However, it is still accessible from the selected car via links, so may be relevant.

If the control module is replaced, the test plan for replacing the control module must be performed.

-- Perform the "control module, replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .

Continuation

-- Remove the cupholder. Refer to CUPHOLDER, REMOVING AND INSTALLING .

-- Disconnect the connectors -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Use the Hook Tool:T40207 to release the hooks -A arrows-.

-- Move the Control Module for Emergency Call Module and Communication Unit -J949- -1- forward first -arrow B- and then remove it.