Chip Card Reader Control Module J676, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi Q4 e-tron and 2023 Audi Q4 e-tron. However, it is still accessible from the selected car via links, so may be relevant.
If the control module is replaced, the test plan for replacing the control module must be performed.
-- Perform the "control module, replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .
Continuation
-- Open the glove compartment.
-- Remove the chip card from the Chip Card Reader Control Module -J676-.
-- Push the control module -1- toward the rear -arrow- until it can be removed.
-- Disconnect the connectors on the control module -1-.