Overview - Control Module And Hydraulic Unit

Courtesy of AUDI OF AMERICA, LLC

1. ABS Control Module -J104-
   • Refer to ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING  .
2. Brake Line to Right Rear Brake Cylinder
   • With commercially available standard tools: 14 Nm
   • With special tools Mini Torque Wrench VAS6854, Torque Wrench - Universal Joint VAG 1410/7 and Open Ring Spanner Insert - AF 11mm VAG 1410/6: 12 Nm
   • Diameter 5.25 mm and tube fitting with shorter thread M12 x 1
3. Brake Line to Left Front Brake Caliper
   • With commercially available standard tools: 14 Nm
   • With special tools Mini Torque Wrench VAS6854, Torque Wrench - Universal Joint VAG1410/7 and Open Ring Spanner Insert - AF 11mm VAG1410/6: 12 Nm
   • 5.25 mm diameter and tube fitting with thread M 10 x 1
4. Brake Line to Right Front Brake Caliper
   • With commercially available standard tools: 14 Nm
   • With special tools Mini Torque Wrench VAS6854, Torque Wrench - Universal Joint VAG 1410/7 and Open Ring Spanner Insert - AF 11mm VAG 1410/6: 12 Nm
   • Diameter 5.25 mm and tube fitting with shorter thread M12 x 1
5. Brake Line to Left Rear Brake Cylinder
   • With commercially available standard tools: 14 Nm
   • With special tools Mini Torque Wrench VAS6854, Torque Wrench - Universal Joint VAG 1410/7 and Open Ring Spanner Insert - AF 11mm VAG 1410/6: 12 Nm
   • 5.25 mm diameter and tube fitting with thread M 10 x 1
6. ABS Hydraulic Unit -N55-
   • Refer to ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING  .
7. Torx Bolt
   • 1. Step: 1.25 Nm (for positioning the seal)
   • 2. Step: 2.5 Nm
   • Replace after removing
   • Quantity: 4
8. Brake Line to Master Brake Cylinder Secondary Piston Circuit
   • With commercially available standard tools: 14 Nm
   • With special tools Mini Torque Wrench VAS6854, Torque Wrench - Universal Joint VAG 1410/7 and Open Ring Spanner Insert - AF 11mm VAG 1410/6: 12 Nm
   • Diameter 6 mm and tube fitting with thread M 12 x 1
9. Brake Line to Master Brake Cylinder Primary Piston Circuit
   • With commercially available standard tools: 14 Nm
   • With special tools Mini Torque Wrench VAS6854, Torque Wrench - Universal Joint VAG1410/7 and Open Ring Spanner Insert - AF 11mm VAG1410/6: 12 Nm
   • Diameter 6 mm and tube fitting with thread M 12 x 1
10. Rubber Bushing
11. Bracket
12. Brake Booster -NX6-
    • Refer to Overview - Brake Booster/Brake Master Cylinder .
    • Refer to Brake Booster, Removing and Installing .
13. Bolt
    • 20 Nm
    • Quantity: 3
14. Bracket
15. Bolt
    • 8 Nm
    • Quantity: 2