Control Module/Amplifier For Digital Sound System, Removing And Installing, MIB 3: Removing
WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
-- Raise the front seat into its highest position and then move it all the way back.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the floor mat.
-- Remove the expanding rivets -2- and then the cover -1-.
-- Disconnect the connector -3-.
-- Release the retainers -arrows-.
-- Remove the Digital Sound System Control Module -J525- -2-.