Overview - Driver Assistance Systems Control Module

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi S7, 2024 Audi RS 7 Sportback, 2024 Audi A7 Quattro, 2023 Audi S7, and 2023 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Driver Assistance Systems Control Module

Courtesy of AUDI OF AMERICA, LLC

Driver Assistance Systems Control Module -J1121-
- There are different versions. Refer to the Parts Information.
- Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
Mount
- There are different versions. Refer to the Parts Information.
- For the Driver Assistance Systems Control Module -J1121-
Bolt
- Small mount: quantity: 3
- Large mount: quantity: 4
- 8 Nm
Bolt
- Small mount: quantity: 3; tightening sequence. Refer to Fig 2.
- Large mount: quantity: 5; tightening sequence. Refer to Fig 3.
Connector
Connectors
- Allocation. Refer to the appropriate Wiring Diagram.

Small mount for driver assistance systems control module - tightening specification and sequence

Fig 2: Driver Assistance System Control Module Bolts Tightening Sequence (Small Mount)

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts to 5 Nm in the following sequence: -1, 2, and 3-.

Large mount for driver assistance systems control module - tightening specification and sequence

Fig 3: Driver Assistance System Control Module Bolts Tightening Sequence (Large Mount)

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts to 5 Nm in the following sequence: -1 through 5-.