LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A7 e Quattro Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Driver Assistance Systems) >> 98 Assistance Systems >> Sensors And Control Modules >> Night Vision System Camera -R212-, REMOVING AND INSTALLING >> Protective Window, Removing

Protective Window, Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi S7, 2024 Audi RS 7 Sportback, 2024 Audi A7 Quattro, 2023 Audi S7, and 2023 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If the protective window is no longer water tight due to damage, the Night Vision System Camera -R212- must be completely replaced. Refer to Night Vision System Camera -R212-, REMOVING AND INSTALLING .

-- Remove the trim  ) OVERVIEW - NIGHT VISION SYSTEM CAMERA.

-- Push the retaining tabs -arrows- together and turn the cover approximately 90° counter-clockwise.

Fig 1: Turning Cover Approximately 90 Degrees Counter-Clockwise
GWWA44-10231Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover, protective window and seal from the Night Vision System Camera -R212-.

Installing

Install in the reverse order of removal while noting the following:

-- Calibrate the Night Vision System Camera -R212-. Refer to INFRARED SYSTEM, CALIBRATING .

Tightening Specifications