Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi S7, 2024 Audi RS 7 Sportback, 2024 Audi A7 Quattro, 2023 Audi S7, and 2023 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- The camera field of vision on the inside of the windshield must not be fogged up or dirty.
-- Clean the viewing window on the windshield with Cleaning Solution :D 009 401 04 .
-- The clip -1- must be replaced each time the front camera is removed. Remove the clip in the direction of the -arrow- from the mount -2- to do so.
-- Insert the guide -3- for the driver assistance systems front camera -1- into the right mount -2- and place the support -4- on the clip -5-.
-- Insert the support between the clip and the mount, and then push the support downward until it clicks into place.
- The support -4- must rest against the mount -6- -arrow-.
-- Calibrate the driver assistance systems front camera. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .
- Conditions when the driver assistance systems front camera must be calibrated. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .