Digital Sound System Control Module -J525-, REMOVING AND INSTALLING, ADVANCED SOUND SYSTEM (8RF), FROM MY 2021: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi S7, 2024 Audi RS 7 Sportback, 2024 Audi A7 Quattro, 2023 Audi S7, and 2023 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the left luggage compartment side trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, VEHICLES WITHOUT HIGH-VOLTAGE SYSTEM , or LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, VEHICLES WITH HIGH-VOLTAGE SYSTEM .

-- Remove the nuts -arrows- from under the bracket -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -arrows- from the top of the bracket -2-.

-- Pivot out the bracket -2- with the Digital Sound System Control Module -J525- -1-.

-- Release and disconnect the connectors -3- and -4- from the Digital Sound System Control Module -J525- -1-.

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Digital Sound System Control Module -J525- -1- from bracket -2-.