Rear Sunroof Control Module -J392-, PROGRAMMING

If the Rear Sunroof Control Module -J392- was replaced, it must be activated after installing.

-- Connect the Vehicle Diagnostic Tester.

-- Switch the ignition on.

-- Select and start the Diagnostic  operating mode.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

• Diagnostic-Capable Systems
• 00DD - Rear Sunroof Control Module -J392
• 00DD - Rear Sunroof Control Module, functions
• 00DD - Replace control module

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.