Seat Functions Control Module, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi SQ7, 2021 Audi Q7, 2020 Audi SQ7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch off the ignition.
-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .
Power Standard Seat:
-- Open the tabs -arrows-.
-- Remove the control module -1- from the bracket.
-- Release the connector safety catch and disconnect the connectors -2-.
Comfort/Sport/Super Sport seat:
-- Release the retaining tabs -arrows-.
-- Remove the control module -1- from the bracket.
-- Release the connector safety catch and disconnect the connectors -2-.