Overview - Windshield Projection (Head-Up Display)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5, 2022 Audi A5 Quattro, 2021 Audi S5, and 2021 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Windshield Projection (Head-Up Display)

Courtesy of AUDI OF AMERICA, LLC

Nut
- 8 Nm
- Quantity: 3
Expanding Rivet
- For air duct
Exterior Bracket
- For windshield projection control module
- Removing and installing. Refer to OUTER BRACKET, REMOVING AND INSTALLING .
Bolt
- Tightening sequence. Refer to Fig 2.
- Replace after removing.
- Quantity: 2
Instrument Panel
Bolt
- 1 Nm
- Quantity: 5
Upper Cover
- Removing and installing. Refer to Windshield Projection Head Up Display Control Module -J898-, REMOVING AND INSTALLING .
Frame
- For upper cover
Air Duct
- For windshield projection control module
Expanding Rivet
- For air duct
Bolt
- Tightening Specifications and Sequence. Refer to Fig 2.
Windshield Projection Head Up Display Control Module -J898-
- Removing and installing. Refer to Windshield Projection Head Up Display Control Module -J898-, REMOVING AND INSTALLING .
- Calibrating. Refer to Windshield Projection Head Up Display Control Module -J898-, CALIBRATING .
Bolt
- Replace after removing.
- Tightening Specifications and Sequence. Refer to Fig 2.
- Quantity: 2
Interior Bracket
- For windshield projection control module
- Removing and installing. Refer to INNER BRACKET, REMOVING AND INSTALLING .
Central Tube
Nut
- 8 Nm
- Quantity: 3

Windshield Projection Head Up Display Control Module - Tightening Specification and Sequence

Fig 2: Windshield Projection Head Up Display Control Module

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in the sequence shown.

Bolts	Tightening Specification
-1-	5.5 Nm
-2 and 3-	4 Nm