Overview - Windshield Projection (Head-Up Display)
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
- Exterior Bracket
- For windshield projection control module
- Must not be removed
- Nut
- Must not be loosened
- Quantity: 3
- Windshield Projection Head Up Display Control Module -J898-
- Removing and Installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING .
- Bolt
- Tightening sequence. Refer to Fig 2.
- Replace after removing
- Quantity: 2
- Expanding Rivet
- For air duct
- Air Duct
- For windshield projection control module
- Instrument Panel
- Clip
- Upper Cover
- Removing and Installing. Refer to OVERVIEW - INSTRUMENT PANEL
- Expanding Rivet
- For air duct
- Bolt
- Tightening Specifications and Sequence. Refer to Fig 2.
- Bolt
- Tightening Specifications and Sequence. Refer to Fig 2.
- Replace after removing
- Quantity: 2
- Instrument Panel Crossmember
- Nut
- Must not be loosened
- Quantity: 3
- Interior Bracket
- Must not be removed
- For windshield projection control module
Windshield Projection Head Up Display Control Module - Tightening Specification and Sequence
-- Tighten the bolts in the sequence shown in illustration.
- 5.5 Nm
- 4 Nm
- 4 Nm