Wiper Arm, Adjusting: Procedure

WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Window Wiper Arm, Adjusting

Courtesy of AUDI OF AMERICA, LLC

-- Remove the wiper arm. Refer to WIPER ARM, REMOVING AND INSTALLING .

-- Switch the ignition on.

-- Activate "rear wiping" and let the wiper arm run to end position.

-- Switch off the ignition.

-- Position the wiper arm with the wiper blade mounted on the windshield wiper axle and align the wiper blade to the rear window as follows:

Dimension -a- = 19 + 5 mm.

TIP:

The dimension is the distance between the wiper blade tip and the lower edge of the window.

-- Tighten the wiper arm nut.

-- Switch the ignition on.

-- Activate "rear wiping" and let the wiper arm run to end position.

-- Check the wiper arm adjustment again and correct if necessary.