Display Control Head, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- If the Rear A/C Display Control Head - E265- is replaced, perform the test plan to replace the Rear A/C Display Control Head -E265-. Refer to Vehicle Diagnostic Tester.
Procedure
-- Connect the Vehicle Diagnostic Tester.
-- Select Diagnostic mode and start the diagnosis.
-- Select the Test plan tab.
-- Press the Select custom test button and select the following tree structure in order:
- Diagnostic-capable systems
- 0009 - Electronic central electric - J519
- 0009 - Electronic central electric, functions
- 0009 - E265 - Rear A/C Display Control Head
- → Replace control module
| Component | Tightening Specification |
|---|---|
| Rear A/C display control head | 2 Nm |