Overview - Windshield
WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.
The following dimensions represent the distances at the marked points. This must also be oriented to the layout of the original adhesive bead on the removed component.
- Adhesive Bead
- Upper
- Market-Specific Version
- Observe minimum curing times. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
A6:
- Different spaces:
- Dimension -e- = 17.8 mm
- Dimension -f- = 187 mm
- Dimension -g- = 263 mm
- Dimension -h- = 180 mm
- Adhesive bead thickness. Refer to Adhesive Application: .
A7 Sportback:
- Different spaces:
- Dimension -e- = 18.1 mm
- Dimension -f- = 18.7 mm
- Dimension -g- = 263 mm
- Dimension -h- = 181 mm
- Adhesive bead thickness. Refer to Adhesive Application: .
- Adhesive Bead
- Observe minimum curing times. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
A6:
- Different distances to window edge:
- Dimension -a- = 7.5 mm
- Dimension -b- = 7.6 mm
- Dimension -c- = 7.2 mm
- Dimension -d- = 7.1 mm
- Adhesive bead thickness. Refer to Adhesive Application: .
- Positioning of the double adhesive bead 1
A7 Sportback:
- Different distances to window edge:
- Dimension -a- = 7.7 mm
- Dimension -b- = 7.7 mm
- Dimension -c- = 8.3 mm
- Dimension -d- = 8.4 mm
- Adhesive bead thickness. Refer to Adhesive Application: .
- Positioning of the double adhesive bead 1
- Observe minimum curing times. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
- Plenum Chamber Cover Frame
- Windshield
- Removing and Installing. Refer to WINDSHIELD, REMOVING AND INSTALLING .
- Center the side distance to the A-pillars
- Distance from the windshield to the upper window frame. Refer to Cover Profile, Mounting on Undamaged Windshield .
Protective Molding, Removing
-- For a new windshield -3-, the protective molding -1- must first be removed from the frame -2- before assembling the plenum chamber cover.