LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Communication (1 Of 2)) >> 91 Communication >> Sound System >> Control Module/Digital Sound System Amplifier, Removing And Installing >> Control Module/Digital Sound System Amplifier, Removing And Installing, Coupe/SPORTBACK >> Removing

Control Module/Digital Sound System Amplifier, Removing And Installing, Coupe/SPORTBACK: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5, 2022 Audi A5 Quattro, 2021 Audi S5, and 2021 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Open the storage compartment on the left side of the luggage compartment.

The bracket with the Digital Sound System Control Module -J525- must be removed first.

-- Release and disconnect the connectors -1- from the Digital Sound System Control Module -J525- -2-.

GWWA91-12478Courtesy of AUDI OF AMERICA, LLC

-- Insert the : VAS6223/9  -1- onto the MOST bus connector -2-.

Fig 1: Fiber-Optic Cable Harness Connector And Protective Cap For Cable Connector VAS 6223/9
GWWA97-0760Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows- on the bracket and remove the Digital Sound System Control Module -J525- -2- with the bracket.

GWWA91-12478Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the Digital Sound System Control Module -J525- -1- from the bracket -2-.

GWWA91-12479Courtesy of AUDI OF AMERICA, LLC