ATF Cooler, Removing And Installing: Installing
Install in the reverse order of removal while noting the following:
NOTE:
Secure all hose connections with hose clamps corresponding to series production. Refer to the Parts Information.
Vehicles with Bolts -left arrows- on the ATF Lines
-- Loosen all three bolts from the ATF lines -arrows-, but do not remove.
CAUTION:
The ATF cooler can be damaged by ATF lines installed under stress.
- By loosening the bolts tension is created in the ATF lines.
-- Connect the ATF line all the way and secure using the clips.
-- Re-tighten the bolts -arrows- to the tightening specification.
Continuation for All Vehicles
-- Connect the ATF line all the way and secure using the clips.
- Any leaking ATF lines must be replaced.
- Replace bent or stretched clips.
- The clips must be secure.
-- Check the ATF level. Refer to ATF LEVEL, CHECKING .