Transmission, Transporting
Special tools and workshop equipment required
- Hook And Support Tool:3311 with Hook And Support Tool - Bolt:3311/1
- Shop Crane:VAS6100
Procedure
- Transmission removed. Refer to TRANSMISSION, REMOVING AND INSTALLING .
CAUTION:
Transmission components could be damaged if they are not set down correctly.
- Do not place the transmission on the ATF cooler or oil pan.
WARNING:
An accident could result if the transmission is not secured correctly.
- Exchange the bolt on the :3311 for a new, longer :3311/1 .
- This is the only way the transmission can be properly secured.
-- Secure the transmission on the :3311 (use new longer bolts :3311/1 ).
-- Lift and transport the transmission with the :VAS6100 .