Camshaft Position Sensor -G40-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi A4 Quattro and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
All except Audi Q7/Q8:
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
Audi Q7/Q8:
Refer to appropriate service information
Continuation for All Vehicles:
-- Disconnect the connector -3-.
-- Remove the bolt -1-, and remove the Camshaft Position Sensor -G40- -2-. (Shown with removed intake manifold.)