Garage Door Opener Control Module, Removing And Installing, Version 2: Removing
WARNING: This page is about a different car, the 2022 Audi S4 and 2022 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the nuts -arrows-.
-- Guide out the mount upwards -1-.
-- Disconnect the connector -2-.
-- Release the retainers -4-.
-- Pivot the control module -5- out of the mount -3-.