LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> RS 5 >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Wiring) >> 97 Wiring >> Control Modules >> Garage Door Opener Control Module, Removing And Installing >> Garage Door Opener Control Module, Removing And Installing, Version 1 >> Removing

Garage Door Opener Control Module, Removing And Installing, Version 1: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Garage Door Opener Control Module
GWWA97-12919Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -5- and free up the wiring harness -3-.

-- Release the retainers -4-.

-- Remove the control module -1- from the mount -2- in direction of -arrow-.