Vehicle Transport Mode, Deactivating
CAUTION:
Risk of injury due to unintended engine start on high-voltage vehicles!
- Pay attention to the high-voltage system warning messages:
- For procedures where the ignition must be switched off.
NOTE:
The Full pre-delivery inspection test program may also be performed as part of the pre-delivery inspection.
Procedure:
-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .
-- Select Diagnostic mode and start the diagnosis.
-- Perform the vehicle identification.
-- Deselect "Working with Guided Fault Finding" by removing v and pressing Accept .
-- Switch to the "Special Functions" tab and select the following program:
- 34 - Activate/deactivate vehicle transport mode
-- Start the program using Perform test.. .
-- Continue the program sequence.
NOTE:
The vehicle can lower by deactivating the vehicle transport mode.