Steering Column, Removing And Installing: Installing

Courtesy of AUDI OF AMERICA, LLC

Install in the reverse order of removal while noting the following:

-- Bring the steering column into the installation position by engaging the mounting hooks -1- on the central tube -2- -arrow-.

TIP: 

The installation position of the version with a mechanical steering column is shown.

-- Install the bolts loosely and then tighten. Refer to Figure.

-- Install the steering intermediate shaft. Refer to STEERING INTERMEDIATE SHAFT, REMOVING AND INSTALLING .

• Calibrate the Steering Angle Sensor -G85-. Refer to Steering Angle Sensor -G85- BASIC SETTING .
• Versions with power steering column: if the steering column is replaced, perform the basic setting for the Power Adjustable Steering Column Control Module -J866-. Refer to DIAGNOSTIC ENTRIES .