Technical Data, Brakes
Front Brakes
| PR Number | 1ZA, 1ZB | 1LA, 1LD | |
|---|---|---|---|
| Brake Caliper | 1 Piston | 1 Piston | |
| Brake Rotor | Diameter in mm | 312 | 340 |
| New thickness | mm | 25 | 30 |
| Wear limit | mm | 23 | 27 |
- Maximum lateral run-out of steel brake rotor = 0.06 mm
- Measurement in installed brake rotor
- Use Dial Indicator Bracket: VAS6079/1 ; Dial Indicator - 0-10mm: VAS6079 .
- Clean dirt and rust off the brake rotor.
- Measure 10 mm away from the outer edge of the brake rotor.
Brake pads wear limit. Refer to BRAKE PADS, CHECKING THICKNESS .
Rear Brakes
| PR Number | 1KU | 1KZ | |
|---|---|---|---|
| Brake Caliper | 1 Piston | 1 Piston | |
| Brake Rotor | Diameter in mm | 300 | 310 |
| New thickness | mm | 12 | 22 |
| Wear limit | mm | 10 | 20 |
- Maximum lateral run-out of steel brake rotor = 0.06 mm
- Measurement in installed brake rotor
- Use Dial Indicator Bracket: VAS6079/1 ; Dial Indicator - 0-10mm: VAS6079 .
- Clean dirt and rust off the brake rotor.
- Measure 10 mm away from the outer edge of the brake rotor.
Brake pads wear limit. Refer to BRAKE PADS, CHECKING THICKNESS .