Selector Lever Cable, Checking And Adjusting: Adjusting:

-- Move the selector lever into "P" position.

• The adjusting screw -arrow- must be loosened.

  Courtesy of AUDI OF AMERICA, LLC

-- Move the selector lever -2- on the transmission into "P" (push the gearshift lever toward the rear).

• The parking lock must be engaged.

• The parking lock is engaged when it is not possible to rotate both front wheels in the same direction at the same time.

-- Lightly tap the handle on the selector lever back and forth but do not move it out of "P" under any circumstances.

• This places the selector lever cable core in its optimal position.

-- Tighten the bolt -arrow-.

Tightening Specification 

• Refer to OVERVIEW - SHIFT MECHANISM