Diagnostic Mode 09 - Read Vehicle Information
Diagnostic Mode 09 makes it possible to access vehicle specific information from the control modules (where applicable).
NOTE:
Depending on the scan tool and protocol used, Diagnostic Mode 09 and the information provided may be referred to by a different name.
Test Requirement
- No DTCs stored in the DTC memory.
Procedure
-- Connect the scan tool.
-- Switch the ignition on.
-- Select Mode 09: Vehicle information.
-- Select the desired Test ID.
-- The information requested will be displayed on the scan tool screen.
The following table is a numerical list of all Test IDs that may be selected.
| Test-ID | Diagnostic text |
|---|---|
| $00: | Supported Info Types $01 - $20 |
| $02: | Vehicle Identification Number |
| $04: | Calibration Identifications |
| $06: | Calibration Verification Numbers |
| $08: | In-Use Performance Tracking For Spark Ignition Engines |
| $0A: | ECU Name |
| $14: | Distance Traveled Since Evap Monitoring Decision |
| $16: | Vehicle Operation Data - Engine Run/Idle Time |
| $17: | Vehicle Operation Data - Distance/Fuel Used |
| $18: | Vehicle Operation Data - PKE/EOE |
| $19: | Vehicle Operation Data - PSA |
| $20: | Supported Info Types $21 - $40 |
| $22: | Run Time for Stop-Start and Coasting Off-Cycle Credit Vehicle Data (not for MQ) |
| $24: | Active Powertrain Warm-up Features Off-Cycle Credit Vehicle Data |
-- Switch the ignition off.