Power Adjustable Steering Column Control Module -J866-, REMOVING AND INSTALLING: Installing

Install in reverse order of removal and Note The Following: 

-- After installing a new Power Adjustable Steering Column Control Module -J866- activate the control module.

-- Connect the Vehicle Diagnostic Tester.

-- Switch the ignition on.

-- Select and start the Diagnostic  operating mode.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

• Body
• Electrical system
• 01 - OBD-capable systems
• 09 - Vehicle Electrical Control Module System J519
• 09 - Power Adjustable Steering Column Control Module J866
• J866 Power Adjustable Steering Column Control Module J866 basic setting

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.