OVERVIEW - EVAP SYSTEM, WITH Fuel Tank Leak Detection Module -GX36-

Fig 1: Exploded View Of EVAP System, With Fuel Tank Leak Detection Module -GX36-

Courtesy of AUDI OF AMERICA, LLC

1. Bolt
   • 1.6 Nm
   • Quantity: 4
2. Nut
   • 20 Nm
3. Bracket
4. Bolt
   • 20 Nm
5. Bleeder Line
   • To the EVAP Canister Purge Regulator Valve 1 -N80-
6. Bleeder Line
   • To the Fuel Tank Leak Detection Module - GX36-
7. Bleeder Line
   • To Tank Switch-Off Valve -N288-
8. Bracket
9. Bolt
   • Quantity: 2
10. Tank Switch-Off Valve -N288-
    • Installed depending on the vehicle version
    • Removing and Installing. Refer to Tank Switch-Off Valve -N288-, REMOVING AND INSTALLING .
11. Nut
    • 20 Nm
    • Quantity: 2
12. Spacer Sleeve
13. Rubber Bushing
14. Bleeder Line
    • To the tank
15. Bleeder Line
    • To the Fuel Tank Leak Detection Module - GX36-
16. Fuel Tank Leak Detection Module -GX36-
    • Removing and Installing. Refer to Fuel Tank Leak Detection Module -GX36-, REMOVING AND INSTALLING .
17. Bracket
18. Bolt
    • 1.8 Nm
    • Quantity: 3
19. Bolt
    • 8 Nm
    • Quantity: 2
20. Air Filter
    • Removing and Installing. Refer to VENT LINE WITH FILTER, REMOVING AND INSTALLING .
21. Nut
    • 2.1 Nm
22. EVAP Canister
    • Component location: right rear
    • Removing and Installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING .
23. Bolt
    • 20 Nm
24. Bolt
    • 4 Nm
    • Quantity: 4
25. Heat Shield